Urgent leak or storm damage? Call 01263 808938 - answered day and nightUrgent leak? Call 01263 808938
Cromer Roofing Specialists
01263 808938 Get a Quote →

Lead Work in Aylsham

If you've spotted a damp patch on a chimney breast or noticed staining around a dormer, the leadwork on your roof is the first place to look.

Urgent leak or storm damage?

Call any time. Calls are answered day and night and passed straight to our roofers.

Call now: 01263 808938
Lead Work · Aylsham

Expert Lead Work
in Aylsham

Why Leadwork Fails - and What to Look For

Most roof leaks around chimneys, dormers and valley gutters come back to one thing: lead that was poorly fitted in the first place, or lead that has worked loose over time. Knowing the warning signs early can save you a great deal of money, because a small drip at a flashing rarely stays small for long.

The most telling sign is a damp patch or tide mark on an internal wall directly below a chimney, or on the ceiling beneath a dormer window. If the staining appears after rain and dries out between showers, the water is almost certainly tracking in at a flashing joint rather than through a cracked tile. That matters, because replacing tiles without addressing the lead will not fix the problem.

Common Warning Signs You Should Not Ignore

  • Lifting or open joints at the chimney base - the mortar fillet or lead flashing has pulled away from the brickwork, leaving a gap water can run straight into.
  • Cracked or crumbling mortar on step flashings - you may be able to see this from ground level if you look along the line where the roof slope meets a chimney stack or parapet wall.
  • Rust-coloured staining on render or brickwork - iron oxides from old nails or clips beneath the lead can bleed through, showing where water has been sitting.
  • Visible lead that has split or torn - lead that was cut too thin, fixed incorrectly, or laid in sheets that were too large will eventually crack as it expands and contracts with temperature changes.
  • Bubbling or blistering of lead on a flat area - a sign that the sheet was bonded poorly or that moisture became trapped beneath it.
  • Moss or algae growing at a flashing joint - a persistent damp microclimate at that point, which usually means water is lingering there after every shower.
  • A brown watermark on a lath-and-plaster ceiling that has been there for years - older leaks leave ghost stains even after the leak appears to have stopped. Do not assume the problem has resolved itself; it usually has not.

What Causes Leadwork to Fail

Lead is a soft metal that expands and contracts with heat and cold. A sheet of lead in full sun can reach temperatures far above the ambient air temperature, and it will contract sharply on a frosty night. If it was dressed over too large an area as a single piece, or fixed so rigidly that it cannot move, the metal will eventually fatigue and crack at the stress points. This is not a defect in the material - it is a consequence of incorrect installation.

Code 4 lead is the minimum specified by the Lead Sheet Association for most flashing applications. Thinner lead - sometimes described as Code 3 - is occasionally used by those looking to keep costs down, but it lacks the durability needed for exposed joints around chimneys and valleys. When the metal is too thin, it deteriorates faster, particularly on south-facing slopes where solar gain is highest.

Mortar pointing that traps the top edge of a flashing is another frequent cause of failure. The lead needs to be tucked into a raked joint in the brickwork and wedged with lead tingles, then pointed with a flexible sealant. Rigid mortar grips the lead at the top but allows the bottom to move, which eventually shears the joint open. A well-dressed flashing will have a clearly defined stepped profile that follows the brick courses.

Valley gutters are another area prone to problems. In an open valley, the lead sheet drains water from both roof slopes and funnels it to the gutter. If the valley was formed without adequate soakers beneath the tiles at the edges, or if the lead was lapped in the wrong direction, water will work back under the tiles in heavy rain. Blocked or poorly graded valleys can also cause water to pond, and standing water accelerates the oxidisation of the lead surface.

The Difference Between a Patch and a Proper Repair

A roofer who tucks mastic or bitumen sealant over a failing flashing is applying a patch, not a repair. Sealant breaks down in UV light and typically needs redoing within a few years. The correct approach is to strip the old lead back to the brickwork, inspect the substrate for any rot or damage, and dress new lead correctly from scratch.

For chimney flashings this means separate soakers between each course of tiles, step flashings dressed into raked joints, and a cover flashing over the top. Each component plays a specific role, and skipping any of them will lead to the same failure within a few years.

What We Do for Aylsham Homeowners

We carry out all types of leadwork for homes in Aylsham and the surrounding villages, including step and cover flashings at chimneys, soaker replacement, valley gutter relining and dormer flashings. Good leadwork is carried out using code lead dressed and welted in accordance with Lead Sheet Association guidelines.

Before any lead is laid, we check the structure beneath it. Fascia boards, battens and sarking felt close to a leaking flashing are often damp or rotted, and replacing lead over a compromised substrate is a false economy. Where we find damage, we will tell you what needs doing before the lead goes in.

What Does Leadwork Cost?

Leadwork pricing depends on the area covered, the type of joint and the accessibility of the roof. As a general guide, a full chimney flashing replacement on a typical two-storey house - including soakers, step flashings and a cover flashing - commonly falls in the range of £400 to £900 depending on the size of the stack and the complexity of the detail. Valley gutter relining on a standard-sized valley typically costs £300 to £700. These are rough figures; a proper price requires a look at the actual job.

Lead is not a cheap material, and correctly installed leadwork should last for several decades if the substrate is sound and the detail is right. Cutting costs by using lighter code lead or skipping soakers is a false economy that usually results in a repeat repair within a few years.

What to Ask Before You Hire a Roofer for Leadwork

  • Will you use Code 4 lead or heavier for flashings and valleys?
  • Will soakers be fitted individually between each tile course, or will you use a continuous cover flashing only?
  • Will the old mortar be fully raked out before the new lead is tucked in and pointed?
  • Can you check the condition of the substrate - the battens, felt or boarding beneath the lead - before quoting?
  • Do you work to Lead Sheet Association guidelines?

A roofer who gives clear, direct answers to those questions is one who understands the work. Vague answers about "doing it properly" without specifics are worth treating with caution.

Call Us for a Roof Survey in Aylsham

If you have seen any of the warning signs above, or if you know your lead is old and have never had it inspected, call Cromer Roofers to arrange a roof survey. We will tell you honestly what needs doing and give you a clear price for the work.

Why choose Cromer Roofers?

  • Free survey and itemised quote
  • Fixed price - no surprises
  • Local team

Get your free quote

No obligation · We'll call you to arrange a free visit

By submitting you agree to being contacted about your enquiry. No spam, ever.

Urgent leak or storm damage?

Call any time. Calls are answered day and night and passed straight to our roofers.

Call now: 01263 808938