When your roof in Aylsham is giving you repeated trouble, a full replacement is often the most sensible and cost-effective decision you can make.
Call any time. Calls are answered day and night and passed straight to our roofers.
A roof replacement is not something most homeowners plan for, but there comes a point where patching a failing roof costs more in time, disruption and money than simply starting fresh. If you have had the same area patched twice or more, or if you are calling a roofer out every winter, the underlying structure may be telling you something worth listening to.
We strip and re-roof domestic properties across Aylsham and the surrounding North Norfolk area, using materials suited to the local conditions. Every job starts with an honest assessment of what is there already and what the roof genuinely needs.
Knowing what to look for can save you from spending money on repairs that will not last. The following signs, especially when several appear together, suggest a roof is nearing the end of its serviceable life.
Understanding why a roof fails helps you ask the right questions when choosing materials for a replacement. Most failures come down to one or more of the following causes.
Frost damage is one of the most common causes of tile deterioration. Water sits in the small pores of a tile, freezes overnight and expands, causing the tile to crack or flake from the face. Tiles with a lower frost resistance rating fail faster. A quality replacement uses tiles rated to withstand repeated freeze-thaw cycles.
Batten failure is often invisible from outside the property. Roof battens are the horizontal timber strips that tiles hang from. They sit directly behind the tiles and, if the underlay or the tiles themselves let water through, they absorb moisture over years and eventually rot. Rotted battens cannot hold tile nails securely, which is why tiles begin to slip even when they appear intact from the ground.
Underlay degradation was a significant problem with roofs laid before the 1980s. Early underlays were often bitumen felt, which becomes brittle with age and UV exposure. Once it splits or tears, water reaches the battens and rafters. A full replacement strips this out and installs a modern breathable underlay, which also helps regulate moisture in the loft space.
Poor original workmanship shortens a roof's life considerably. A roof laid without adequate nail fixings, with incorrect overlap on the tiles, or with mortar-bedded ridges that were never pointed properly will show problems decades before a well-built roof of the same age.
Lead and flashing failure around chimneys, dormers, valleys and abutments is one of the most frequent causes of persistent leaks. Lead work has a long lifespan when properly dressed, but mortar pointing that was used instead of lead or stepped flashing deteriorates much faster, and a leak traced to a flashing is sometimes misdiagnosed as a tile problem.
A full re-roof strips the property back to the rafter level. All old tiles or slates are removed, the felt or underlay is taken off, and the battens are cleared. The rafters and deck are then inspected and any damaged timbers are cut out and replaced before anything new goes on.
New breathable underlay is fixed across the rafters, new treated timber battens are nailed across it, and the new tiles or slates are fixed in sequence from the eaves upward. Ridge and hip tiles are bedded or mechanically fixed at the top, and all valley, chimney and abutment flashings are cut and dressed in lead before the job is handed back.
For flat roof sections, the approach depends on the system being used. EPDM rubber membrane has become a popular choice for flat or low-pitch roofs on extensions and outbuildings. It is laid in large sections with few joins, which reduces the number of potential leak points, and it handles standing water better than traditional three-layer felt. Felt systems are still used and, when properly specified and installed, give a solid result for smaller flat areas.
Roof replacement costs vary with the size of the roof, the pitch, the number of hips and valleys, access, the tile or slate specified, and the condition of the timbers underneath. As a general guide, a full re-roof on a typical semi-detached house in Norfolk using concrete interlocking tiles runs from around £5,000 to £9,000. Natural Welsh slate or clay plain tiles cost more, with the same house ranging from around £8,000 to £14,000 or above depending on the slate grade chosen. Scaffold is almost always needed and is usually included in a quote; confirm this before accepting any price.
A flat roof replacement on a typical single-storey extension runs from around £800 to £2,000 for a felt system and from around £1,200 to £3,000 for EPDM, depending on the area covered. These are indicative figures; always get a written itemised quote before work begins.
A good roofer will have clear answers to all of these before they start.
We work across Aylsham and the surrounding area. Nearby places we cover include Holt, Sheringham and the villages around them. If you are not sure whether we cover your area, call and ask.
If your roof is showing any of the warning signs above, the right move is a proper inspection from roof level, not just a look from the ground. Call Cromer Roofers to arrange a survey and we will give you a straight assessment of what your roof needs and what a replacement would involve for your property.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.